Skip to content
TruSTRENGTH -
High Strength Steel

The strong silent type

CMC Impact Metals is a trusted leader in the heat-treated, high-strength steel market. Our TruSTRENGTH steel products are melted and manufactured in the U.S. and built on proven processes and superior, uncompromising quality.

Manufacturers are continuously looking to reduce weight while improving the performance of their products, without compromising performance integrity. TruSTRENGTH steel is the solution. Our high strength steel provides the strength, weldability and durability to take your products to the next level in performance.

CMC_TruStrength_1244x277.png

Quality and strength

The combination of TruSTRENGTH’s high-strength properties and a lighter weight than other steel products means your equipment can carry more payload while still withstanding the most stringent working conditions. Lighter equipment also leads to a lower fuel consumption and improved operating performance.

Formability and weldability

The refined chemical composition, along with the heat-treating, quench and tempering processes used to create TruSTRENGTH, creates a steel with the ductility that is necessary for ease of formability and fabrication in the downstream manufacturing process.

Manufacturers and fabricators can use many conventional, manual or automated welding processes when working with TruSTRENGTH products due to the steel’s advanced chemical composition and mechanical properties.

Melted and manufactured in the U.S., our high-strength flat bar, plate and structural products are delivered with uncompromising quality and expertise.
 

TruSTRENGTH - FLAT BAR

TruSTRENGTH flat bar is a mill-rolled product with a smooth edge that helps ensure uniformity, consistency and straightness. Available in grades ranging from 80 to 150 ksi, TruSTRENGTH’s flat bar has high-strength properties at a lighter weight which translates to cost savings for manufacturers and has a straightness guarantee of 1/8" over 5' for flat bar, exceeding ASTM A6 standards for straightness. Additionally, TruSTRENGTH 100 ksi angles provide a structural product that features the same high-strength, low-weight properties as TruSTRENGTH flat bar when compared to more conventional, non-treated grades.

Applications

Our high-strength flat bar and structural steel is an integral part of products in industries requiring a high-performance steel product. TruSTRENGTH steel meets the most stringent requirements and specifications for both its chemical and mechanical properties and is suited for the following applications:

  • Flatbed trailers
  • Medium and long-haul trucks
  • Forestry trucks and harvesters 
  • Rail cars
  • Jet bridges
  • Heavy transport trucks
  • Mobile cranes
  • Lift trucks
  • Snow plows
  • Construction cranes

Flat bar products

TruSTRENGTH flat bar is a mill-rolled product available in custom length orders. We also offer a flat bar stocking program to ensure that you have the right products on demand and on schedule. Please call for additional details or to inquire about other products offerings not included here.


Click on the product name to download the specification sheet.
 

Flat Bar Products
  Yield Strength

Thicknesses
(inches)

Widths
(inches)
Lengths
(Feet)
Tensile
Strength
Elongation Reduction
of Area
Charpy Impact
(longitudinal)
@-40°F (-40°C)
TruSTRENGTH 80 Flat Bar
(ENG)
80 ksi
(552 MPa)
1/4” - 2” 3” - 12” Up to 56’ 95 ksi (655 MPa) 14% 60% 15 ft-lbs (20.3 J)
TruSTRENGTH 100 Flat Bar
(ENG)
100 ksi (689 MPa 1/4” - 2” 3” - 12” Up to 56’ 110-135 ksi (758-931 MPa) 18% 40% 20 ft-lbs (27.1 J)
TruSTRENGTH 130 Flat Bar
(ENG)
130 ksi (896 MPa) 1/4” - 2” 3” - 12” Up to 56’ 140-165 ksi (965-1138 MPa) 15% 35% 15 ft-lbs (20.3 J)
TruSTRENGTH 150 Flat Bar
(ENG)
150 ksi (1034 MPa) 1/4” - 2” 3” - 12” Up to 56’ 155-175 ksi (1069-1207 MPa) 13% 35% 15 ft-lbs (20.3 J)

Chart shows miminum values unless otherwise noted.



TruSTRENGTH - STRUCTURAL ANGLES 

CMC Impact Metals provides a range of lengths and sizes of high-strength structural angles. Please call for additional details or to inquire about any product offerings not included here. 

Click on the product name to download the specification sheet. 

Structural Angles
  Yield
Strength
Thicknesses
(inches)
Widths
(inches)
Lengths
(Feet)
Tensile
Strength
Elongation Reduction of Area Charpy Impact
(longitudinal)
@ -40F (-40C)
TruSTRENGTH Angles
(ENG)

100 ksi (689 MPa)

3/16" - 3/4" 3" - 6" 20' - 55'

110-135 ksi (758-931 MPa)

18% 40% 20 ft-lbs (27.1 J)
Chart shows miminum values unless otherwise noted.


 

TruSTRENGTH - FLAT PLATE PRODUCTS

Available in a variety of grades ranging from 100 to 140 ksi, TruSTRENGTH steel plate is melted and manufactured in the U.S. and meets ASTM chemical and mechanical properties. It can be welded, is formable and ready to be fabricated. 

Our TruFLAT technology, along with other inherent TruSTRENGTH properties, ensures that our high-strength plate excels in downstream fabrication processes. Our state-of-the-art heat treating, quench and tempering process reduces and relieves the stresses induced during manufacturing, ensuring the parts remain flat when cut. With a superior surface quality, the smooth finish plate is ready for exposed or painted applications.


Applications 

Our high-strength steel plate is an integral part of products in industries that call for a high-performance steel solution. TruSTRENGTH high-strength steel plate products have various uses and applications, but primarily lend their strength to the transportation, DOT and construction fields, including: 

  • Medium and long-haul trucks 
  • Oilfield rigs 
  • Forestry trucks and harvesters 
  • Rail cars 
  • Jet bridges 
  • Heavy transport trucks 
  • Mobile cranes 
  • Lift trucks 
  • Snow plows 
  • Construction cranes 

Flat plate products 

Please call for any additional details or to inquire about product offerings not included here. 

Click on the product name to download the specification sheet. 

Flat Plate Products
  Yield
Strength (min.)
Thicknesses
(inches)
Widths
(inches)
Lengths
(inches)
CEV
(typical)
Tensile
Strength (min.)
Elongation

Reduction
of Area

Charpy Impact
(transverse)
@-40°F (-40°C)
TruSTRENGTH 100 Plate
(ENG)
100 ksi (689 MPa)

Up to
0.500"

Up to 60" Up to 288" 0.58 110 ksi (758 MPa) 18% 60%

50 ft-lbs
(67.8 J)

TruSTRENGTH 110 Plate
(ENG)
110 ksi (758 MPa) Up to
0.500”
Up to 60" Up to 288" 0.58 120 ksi (827 MPa) 17% 55% 40 ft-lbs
(54.2 J)
TruSTRENGTH 130 Plate
(ENG)
130 ksi (896 MPa) Up to
0.500”
Up to 60" Up to 288" 0.58 140 ksi (965 MPa) 12% 45% 30 ft-lbs
(40.7 J)
TruSTRENGTH 140 Plate
(ENG)
140 ksi (965 MPa) Up to
0.500”
Up to 60" Up to 288" 0.58 150 ksi (1034 MPa) 11% 40% 25 ft-lbs
(33.9 J)
Chart shows typical values unless otherwise noted.

CMC Impact Metals sets the standard for flatness on light gauge quenched and tempered products with our state-of-the-art process. As a result, we guarantee a flatness of 1/4 ASTM A6 on TruSHIELD 500 plate products .300” and thinner. Learn about our TruFLAT technology here.


To learn more about TruSTRENGTH or to request a quote, contact us today.
Call a sales representative

888.682.7337 (Toll Free)

205.338.5131

Email a sales representative
close right chevron right chevron left chevron play Commercial Metals Company